Search Results

If you are not connected to a screen in Viplex Express 4 then you are not able to build playlists to upload to USB. You can get around this by switching into demo mode and adding a fake screen. To do this: Click settings, go to working mode and then select Dem...

Attach the antennas Screw all 6 antennas into their labeled ports. Power on the unit Connect the power supply. Allow ~60 seconds for full boot. When fully booted - the status, wi-fi, and cellular lights should be a solid green. See underneath the unit f...

Right click the Playlist you want to export and select USB Playback Select the Playback mode and Replace/Keep behaviors you want. Typically we use Copy and Play and Replace. Select the USB Drive and Type the password for the specific model of Poster you are wo...

To access the Presets menu, click the "PMEM/TMEM" button on the right side of the controller. Keep in mind, Presets will save ALL information that is currently active in the camera's current state, including White Balance, Gain level, Iris Mode, Focus Mode, et...

Navigate to the Solutions Tab Click New and select Regular Screen Name your Solution and change the Resolution to 320x1080. The other settings can be ignored. Hit OK. You can also set it to 640, 960, 1280, 1600, or 1920 if you are building a playlist to stret...

Panasonic PTZ Camera Setup AW-UE160 + AW-RP150  |  LAN Control Configuration 1.  Signal Flow The controller is powered with it's power supply, and the cameras are powered with PoE++ from the injectors. The PoE++ injectors should live on the tech table with the...

To access the Presets menu, click the "PMEM/TMEM" button on the right side of the controller. Keep in mind, Presets will save ALL information that is currently active in the camera's current state, including White Balance, Gain level, Iris Mode, Focus Mode, et...

On the Solutions Tab select the Checkboxes of the Solutions you would like to upload onto the USB Drive. Click USB playback. Select the Play mode and select what happens when solutions share the same name. Typically we use Copy and Play and overwrite them. S...

Please note that Access Point Name and SSID information may differ in physical location between models of poster. Requires An iOS Device ViPlex Handy 1. Turn on the Poster 2.Find the Poster's Name on the Back of the Poster It will be a Number preceded by th...

Please note that Access Point Name and SSID information may differ in physical location between models of poster. Requires A wifi capable computer running Windows or DHCP backed hardline network ViPlex Express v3 or v4 1. Turn on the Poster 2.Find the Poster...

Go to Solution Management Hit New Solution at the Bottom Name your Solution and set the Resolution to 320x1080 You can also set it to 640, 960, 1280, 1600, or 1920 if you are building a playlist to stretch across 2-6 posters, But I recommend building a solut...

Go to Solution Management and Press Publish(Paper Airplane) on the Solution you wish to send to the Screen. Select the Device you wish to Publish to and then hit Publish at the bottom.

Under Construction

Under Construction

Under Construction