Search Results

1. Unplug all cables and power the poster off. 2. Slide the bag as labeled over the top of the Poster 3.Now Lay the poster down, collapse the fold out support, tuck the bottom edge into the bag, and zip it closed 4. Finally place the bag back in it's coff...

Set-up of Primary, Back-up and Iso Recording Devices  Feed audio to all devices, including iso feeds of cameras and graphics.  This is critical when synchronizing the various feeds during post-production.  Back up recording devices should receive audio...

backup.vr120 If you receive a Roland that is still configured from it's last show, you can load this file onto a flash drive or SD card, insert it into the Roland, and restore settings using that backup file. We've customized it so that it sets your Roland up...

BACKUP_0000.V16

Shure Microflex Complete Wireless "Microflex® Complete Wireless empowers meeting participants to share ideas and make decisions anywhere. Advanced Shure wireless technology delivers reliable performance in any environment without complicated setup or cable li...

DX410 Digital Wireless System   "Two-channel intercom system that operates in the 2.4 GHz wireless band with 2-wire and 4-wire bridging, and 2-wire auto-nulling." Information taken from the DX410 User Guide What's in the Box(es)? BS410 Base Station Case...

Dante Controller is used to patch channels, monitor devices, and change internal Dante settings of your devices.  With Dante being built into our Yamaha consoles, Dante controller is not actually necessary, but it is helpful to have for larger Dante systems in...

Dante Controller is used to patch channels, monitor devices, and change internal Dante settings of your devices.  With Dante being built into our Yamaha consoles, Dante controller is not actually necessary, but it is helpful to have for larger Dante systems in...

Check all cables and connections Make sure you are seeing connection lights on all devices Check to make sure the Y00#'s match on the device and the Yamaha console Restart devices Remount device on the console Try just using the Primary network Don't u...

Check cables and connections Make sure the sample rates on all the devices match. Most Dante devices run at 48 kHz Make sure you have a word clock master set Our Yamaha QL1s and DM7s are the default master for their kits The Rios are the default...

This is most likely caused by a conflict with the Primary and Secondary networks colliding. Start the system up with just Primary connected only and make sure all devices are in Redundancy mode before connecting Secondary Avoid using one switch to do both ...

This is likely caused by incorrect settings on the latency in your Dante system Try setting the latency setting higher in the "Dante Setup" menu on the console The more devices and switches in system, the higher the latency setting needs to be Make ...

If you have time, I would suggest going through the free Dante Certification training.  It will take you a few hours to complete, but is full of useful information.  Just focus on Level 1 and 2 for our purposes.  Level 3 is more for network administrators. Da...

ACOUSTICAL Frequency Range1 (-10 dB) : (±3 dB) :   67 Hz-20 kHz 80 Hz-19 kHz Coverage Pattern (-6 dB) Horizontal : Vertical :   110 degrees nominal (500 Hz-16 kHz) Varies with array size and configuration ...

1. Install Zoom. Zoom is in C:\Apps\Miscellaneous on all of our Rental laptops. Otherwise, go to https://zoom.us/download and click the first big, blue "Download" button. 2. Sign into Zoom. DO NOT SIGN INTO THE ZOOM DESKTOP APP! On our Zoom account, one u...

Zoom has a built-in assumption that most people are using low-quality built-in laptop microphones and speakers. To combat the terrible noise and feedback that would ordinarily be caused by this scenario, Zoom automatically performs some audio processing on inc...

Here is a video demonstrating app control: Configuration (Bluetooth) The SlimPAR Q12 BT can be operated with the BT Air application over a Bluetooth connection.  Download and install the BT Air app from your preferred app store.  Press MENU repeatedly ...

Download this xml file to your USB drive. Adding a new Fixture Profile Open your fixtures window, choose the Fixture Builder button on the screen, then select "import." The console should open various folders including your USB device. After the fixture ...

Transmitter and receiver are not connecting In most cases either the fiber between the boxes is bad or they are not patched correctly.  Try swapping the fiber connections on one end.  This might align the transmit of one side with the receive on the other if ...