Skip to main content
Advanced Search
Search Terms
Content Type

Exact Matches
Tag Searches
Date Options
Updated after
Updated before
Created after
Created before

Search Results

441 total results found

Standalone Mode with Manual Control

CW Profile

1.  Enter the Manual Control ("ManCntrl") Menu.  2.  Set the Strobe ("Stro") value to 255. 3.  Set White ("Whit") to your desired intensity (0-255). 4.  Leave the fixture on Manual Controle mode. 

All Pixel Mapping Tutorials

Pixel Mapping with Hog 4

Section 1: BUILDING A PIXEL MAP Section 2: PLAYING BACK AND MODIFYING MEDIA Section 3: DOWNLOADING MEDIA TO THE LIBRARY

Tech Specs

HedgeHog 4X Lighting Consoles

Universe Control: 6Onboard DMX Outs: 2Faders: 10Screens: (1) touchscreen, (1) external touchscreenEncoder Wheels: 4User Keys: 12Networking: •    HogNet•    Fixture-Net: (Art-Net or E1.31/sACN)

All Pixel Mapping Tutorials

Hoglet 4

User Manual: Pixel-Mapping on Hog 4 Section 1: BUILDING A PIXEL MAP Section 2: PLAYING BACK AND MODIFYING MEDIA Section 3: DOWNLOADING MEDIA TO THE LIBRARY

All Pixel Mapping Tutorials

HedgeHog 4X Lighting Consoles

User Manual: Pixel-Mapping on Hog 4 Section 1: BUILDING A PIXEL MAP Section 2: PLAYING BACK AND MODIFYING MEDIA Section 3: DOWNLOADING MEDIA TO THE LIBRARY

All Pixel Mapping Tutorials

Astera Titan Tubes

User Manual: Pixel-Mapping on Hog 4 Section 1: BUILDING A PIXEL MAP Section 2: PLAYING BACK AND MODIFYING MEDIA Section 3: DOWNLOADING MEDIA TO THE LIBRARY

Connecting and Configuring Camera

BlackMagic Design URSA G2

These are instructions on how to properly connect and configure your Blackmagic URSA-G2 Cameras to the ATEM Constellation Engineering racks. In this example, we'll be connecting the Camera as Camera 1. This process is the same for connecting Cameras 2 and 3. ...

Adjusting Back Focus

BlackMagic Design URSA G2

Unable to get your camera into focus when zoomed all the way out? Your camera may need it's back-focus adjusted. Don't worry, it's a simple process - here's what to do:   Locate this tightening screw and use a flathead screwdriver to loosen it. Zoom al...

Camera Control Using ATEM 1 M/E Switchers

BlackMagic Design URSA G2

These are instructions on how to control Blackmagic URSA G2 camera settings, like Iris F-Stop, Gain level, and Shutter Speed with an ATEM 1 M/E switcher. The main use-case for this setup would a smaller sized event where you want to use 1 or 2 URSA G2 cameras...

Control Methods Connectivity

OBSBOT Tail Air Control Methods

Do Not Require Networking OBSBOT Smart Remote Controller Do Not Require Networking But Are Better With It OBSBOT Center OBSBOT Start Require Networking OBSBOT Web G.U.I. Roland Camera Control vMix PTZ BitFocus Companion

3M Super 77 Spray Adhesive

Safety Data Sheets (SDS)

3M(TM) Super 77 Multipurpose Spray Adhesive.pdf

3M Foam Fast 74 Spray Adhesive

Safety Data Sheets (SDS)

3M™ Foam Fast 74 Cylinder Spray Adhesive.pdf

7-Eleven Lucas Windshield Wash -20 Degree F

Safety Data Sheets (SDS)

7-Eleven_Lucas_Windshield_Wash_-20.pdf

Klean Strip Denatured Alcohol

Safety Data Sheets (SDS)

Klean_Strip_Denatured_Alcohol.pdf

DAP Silicone Be Gone

Safety Data Sheets (SDS)

DAP Silicone Be Gone.pdf

Isopropyl Alcohol 91%

Safety Data Sheets (SDS)

ALCOHOL_ISOPROPYL_91PERCENT.pdf

Atomic Lube All Purpose Grease

Safety Data Sheets (SDS)

ATOMIC LUBE All Purpose Grease.pdf

Blue DEF Diesel Exhaust Fluid

Safety Data Sheets (SDS)

Blue DEF Diesel Exhaust Fluid.pdf

Champion Air Brake Anti-Freeze

Safety Data Sheets (SDS)

Champion-Air-Brake-Anti-freeze-SDS.pdf

Chemtronics Flux Off

Safety Data Sheets (SDS)

Chemtronics Flux Off SDS.pdf