Advanced Search
Search Results
11 total results found
ADA Lectern
Truss Sails
Circle Screens
Quick Start
The columns have been designed in such a way that you can loop them over truss and tighten them around a light fixture. Once attached to your rig, you can raise them directly out of the cases without having to do any manual lifting, except for the final few se...
Tech Specs
These are 2' squares, with a plywood cap that has U-bolts spaced at 18" square. Mount this using mega-clamps with eyebolts and 5/16 shackles at each corner, either directly to 18" truss or two battens. Total length is 33', with ribs every 3'. You can attach th...
Troubleshooting
In the past, these have fallen apart because of the velcro coming off. The velcro has been secured on every side in two places by pegs that also anchor the corners inside the sides. They should not fall apart. That said, if the velcro does come loose, you coul...
Quick Start
This kit shows up in one crate containing all 21 panels, a selection of 60" L support brackets, required hardware, extra bits, and an instruction manual. Prep yourself with some small-medium black zipties in case none are in the kit. You'll need them to attach...
Tech Specs
Panels are 33x30", but with the curve the footprint is an even 30x30, with ~6" front to back curve. Kit has 21 panels. Support stacks of 2 or more panels with L brackets. Support single panels by attaching them to stacks of 2 or more.
Troubleshooting
Read the instruction manual. These look straightforward but they can be finicky. Plan out your design first, and look at the corners of the panels to make sure you have holes available in the right position. Corners can be removed and rotated, but it's not a g...
Requesting custom work
Custom lighted columns need to be requested through the Project Manager Request form. That will begin the process of determining if we are able to accommodate the request. Right now, we have four columns at ~2x2x8'. Each column takes 17 panels; four panels per...
Setup at the event
Panels are packed into 24x24x4" boxes, holding just enough panels to complete one 2x2x8' column. Weight of a filled box is close to 45lbs. Printed hardware will arrive in small boxes, often Pelican cases, labeled by color and type. Hands need to be freshly cle...