Advanced Search
Search Results
794 total results found
Mirror Ball | 26" (No Motor)
Also called a disco ball, a mirror ball is roughly spherical, and reflects light in many directions. The surface is made of lots of facets, mostly the same size, and mirrored surface. A mirror ball is usually mounted and attached to a device that allows it to ...
Specs
System Frequency Range 46 Hz - 19 kHz (Preset: VTX A12) Coverage Pattern (-6 dB) Horizontal Vertical 90 degrees nominal (250 Hz - 18 kHz) Varies with array size and configuration System Input Power Rating LF MFHF 2x 8...
JBL VTX A8 Line Array
Manufacturer Website Features Innovative 3-way (bi-amp) design for best-in-class performance JBL Differential Drive™ woofers and Slip Stream™ ports deliver optimal bass response down to 49 Hz Common HF compression driver across A-Series products provides...
JBL VTX B15 Subwoofer
Manufacturer Website User Manual Features New JBL 2285H 15-inch woofer offers low distortion and improved linearitySlipStream double-flared ports reduce noise and air turbulenceDifferential Drive dual-voicecoil, dual-gap woofer design delivers superior low-...
IT
Test
Dual Monitor KVM Kit
Epson 16K (EB-PU2216B)
Include a hyperlink to the product or product manual on the manufacturer's website. This link should be set to open in a New Window.Include a short description of the gear here. No more than a couple of sentences. Include Book Tags below. These are not intende...
Basic QL1 and Rio Dante Network Guide
This is a simple guide for connecting the QL1 to the Rio3224 D2 via Dante.
Setting for DMX Control (AsteraBox Wireless)
Open your Astera App. Add a Bluetooth Bridge. a. Tap the 3 Lines on the top right of the app. b. Tap the message at the top of the screen that says THERE ARE NO BLUETOOTH BRIDGES. TAP HERE TO ADD SOME. If this message is missing and you are st...
Setting for App Control
Turn on and reset your fixtures through the fixture's LED display. Open your Astera App. Add a Bluetooth Bridge. a. Tap the 3 Lines on the top right of the app. b. Tap the message at the top of the screen that says THERE ARE NO BLUETOOTH...
Theatrixx Totem 1.8mm Indoor LED Poster
Totem 1.8mm Bezeled, vertical only, 2 per case
Presets
PRXFULL Use with our PRX412s, has EQ built into the preset PRX HP80 Use with our PRX412s, had EQ and a high pass at 80 Hz CDT520 Use with Renkus-Heinz CDT520 horns. CDT+PRX Allows the CDT-520 horns and the PRX412 to be used on ...
Absen PL Series LED Training Videos
In this video series, we'll take a deep dive into working with our Absen PL Series LED product, getting familiar with the ground support system, and learning about the programming process once built. Join us, as we dive into the wonderful world of LED!
Wiring with a CDT-520 horn and PRX412 on same amp
When using the CDT-520 horns, you notice that they don't have a lot in terms of lower frequencies. We have started to use them with the prx412s to try and make them less abrasive. This usually is set up with the horn being hung on a tower and the PRX on a st...
Main Audio Firmware Master Sheet
Below is the link to the Main Audio Firmware Master Sheet on One Drive. It is a comprehensive list of the audio inventory and the firmware versions on them.
LED Steps
Include a hyperlink to the product or product manual on the manufacturer's website. This link should be set to open in a New Window. Include a short description of the gear here. No more than a couple of sentences. Include Book Tags below. These are not int...