Set-up

1. Using transmitter and receiver(s) of matching kit number
   1. The transmitter(TX) unit with power supply will be at the computer location
   2. The receiver(RX) with power supply will be at the lectern
   3. Each kit includes 1 set of 1 transmitter paired to 2 receivers
   4. And 1 transmitter paired to a single receiver
      1. When working with dual lecterns on a stage use 1 each of the matching receivers at each lectern
      2. These can be connected directly via CAT5/6 Cable or over an existing network
      3. In the case of dual lecterns a switch needs to be used to connect all 3 devices to the network.
2. At the Control table set-up the KVM Switch with power supply
   1. 1 USB device cable to connect the KVM to the transmitter using the console connection on the KVM switch
   2. 1 USB device cable to connect each laptop to a KVM input
   3. Ignore the VGA connectors on the KVM switch
   4. Use an out put of you switcher to send video to the monitors on the Lectern
3. At the Lectern set the 10” Beetronics Monitor and mouse.
   1. Connect these to the receiver
   2. A keyboard can also be connected but is not included in the Kit
4. If supporting notes view it is helpful to the presenters to add a second Beetronics 10” monitor at the lectern 1 showing notes view and 1 showing the slide view. Try to set these so the mouse moves seamlessly from monitor to monitor.