Skip to main content

Fixture Profiles for Hog 4, Versions 3+4

Which version do I need?

You can find out whether you need version 3 or 4 by checking the first value of the firmware version on your console. One place this is given is in your startup window as pictured below. In this example, we need version 3.

 Hog Start 9_18_2024 2_03_38 PM.png

Downloading Official Profiles

  1. Go to https://fixture-library-hub.etcconnect.com/. This window is illustrated below.
  2. Start in the search section under the title "Fixture Library Hub" and choose which "Platform" you are using (Ho4 v3 or v4). 
  3. In the same section type "mac one" into the search bar titled "Filter by Product."
  4. "MAC One by Martin" will populate below the search bar; select it. 
  5. Once you see your "Official Profiles," to the right of the search section, select "Download Profiles." 

Fixture Library Hub - Google Chrome 9_18_2024 2_05_00 PM.png

Adding a New Fixture Profile

  1. Download the hog4lib file to your USB drive, then plug it into any USB port on your Hog 4 console.
  2. On the start window, open the file browser and navigate to the fixture library on the USB drive. 
  3. Drag the library from the USB drive to the "Libraries" folder on the console. 
  4. Launch your show.
  5. Open the Fixtures window and select "Add Fixtures."
  6. Select the "Select Library" softkey on the bottom left side of this page.
  7. Finally, choose the library that you dragged into the libraries folder. It should be named "Martin-Mac_One."

Back to top