ArtNet Connectivity Instructions

*The following steps are to be completed if you need more than 2 universes for your show*

1.    Setup console and all accessories being used for the show.

a.     Accessories should be plugged in before starting console.

2.    Setup ArtNet/DMX Rack included in Hedgehog FOH Kit.

a.     Power cables for external touch screen monitor and console are secured inside the ArtNet Rack.

b.    Use Primary port on back of rack to connect to the internal switch/console.

3.    Start console as normal.

4.    Load previous saved show, or start a new one from the menu.

5.    Once show is running press SETUP on the console.

a.     Located next to the big PLAY button, above the HOG button.

6.    Press NETWORK in the bottom left of the built-in touch screen.

7.    In the window that popped up, click the 1 in the far left column under PROCESSOR

a.     The entire row should highlight in a faint blue color.

8.    Press SETTINGS at the top left of the window.

9.    In the window that popped up, click the OUTPUT tab on the left side.

10. Click ADD MAPPING with the blue + next to it at the top of the spreadsheet.

11. In the window that popped up, change the second drop down menu to 6

a.     The first drop down menu should default to 1

b.    Click the check box for ART-NET, then click OK

c.     The window will then populate the new ArtNet universes into the spreadsheet.

12. The final step is to close the NETWORK window and restart the console.

13. To restart, press SETUP on the console.

14. Click QUIT in the bottom right corner of the screen, and choose RESTART.

15. Choose LAUNCH SHOW.

a.     The lights on the front of the ArtNet rack should be solid green.

16. You may proceed with your show as normal.