Search Results

So You've Turned off the LED Poster's Access Point and Cannot Connect To It Anymore?

Requires: A router A PC with ViPlex Express Installed Cat5/6 to Connect 1. Connect the PC & Poster to the Router 2. Launch ViPlex Express on the PC 3. You Should Be Able to See the Poster on the Connect Screen 4. Go To Screen Control 5. Select ...

Issue Resembles: Requires: A wifi capable PC with Novastar LCT 1. Power on Poster & install Novastar 2. Connect to the Poster's Access Point & Launch Novastar The Access Point SSID is on the back of the Poster, the password is 12345678 3. Select Me...

Remote Pairing  Power on the OBSBOT Tail Air. Press the Tail Air's power button 3 times.(The status indicator will flash light blue)  On the remote hold the Human Tracking button and then the number 1, 2, or 3 that you would like to assign that camera t...

The OBSBOT can use A.I. Tracking to automatically follow both human and animal subjects. 

This is the simplest method of controlling a Tail Air. Pair your Remote. If you depress the joystick you can control the pan and tilt of the Tail Air using the Remote's Gimbal.

All models of Roland would need to be on the same network as the camera in order for these control methods to work. vr-120 HD Menu > Camera Control > Jump to Setup Select which camera you would like to assign it to. Switch the Protocol to VISCA over IP Ch...

It is ALWAYS recommended to have a laptop that can run OBSBOT Center available as this is the best way to adjust any camera settings that you may need to change during setup. These settings can also be accessed through OBSBOT Start but it is simpler to access...